FUTABA T12K - Page 192

192
<Appendix>
Logic mode
 AND:WhenbothswitchesareON,the
conditionisON.
 OR:WheneitherswitchisON,thecondition
isON.
 EX-OR:Whenthetwoswitchesarein
differentstates,theconditionisON.
Switch mode selection
1.Movethecursortothe[SINGLE]itemand
pushtheRTNbuttontoswitchtothedata
inputmode.
2.Selectthe[LOGIC]byscrollingthePush
dial.
*[LOGIC] display blinks.
3.PushtheRTNbuttontochangetothelogic
switchmode.
(Logicswitchsettingscreen)
Logic mode selection
1.Movethecursortothelogicmodeitem
andpushtheRTNbuttontoswitchtothe
datainputmode.
2.SelectthelogicmodebyscrollingthePush
dial.[AND,ORorEX-OR]
*The mode display blinks.
3.PushtheRTNbuttontochangetothelogic
mode.
Swich selection
1.Selecttherightorleftswitchrespectively.
(Refertothedescriptionattheprevious
page.)
 Toreturntothepreceedingscreen,move
thecursortothe[SWITCH]atthetopofthe
screenandpushtheRTNbutton.
Logic switch (Condition Select function only)
The logic switch function lets you turn operation on or off by combining two switches.
FUTABA CORPORATION
oak kandakajicho 8F 3-4 Kandakajicho, Chiyoda-ku, Tokyo 101-0045, Japan
TEL: +81-3-4316-4820, FAX: +81-3-4316-4823
©FUTABA CORPORATION 2017, 12 (1)