GAMATRONIC ELECTRONIC INDUSTRIES LTD.
+
SA: 20, 30 and 40 kVA, Release 2.1
xiii
SAFETY PRECAUTIONS
The UPS system is designed for industrial applications and harsh environments.
Nevertheless the UPS is a sophisticated power system and should be handled with
appropriate care, according to the following guidelines.
WARNING! HIGH TOUCH CURRENT!
EARTH CONNECTION ESSENTIAL BEFORE CONNECTING SUPPLY.
Do’s
• Read this manual carefully before starting installation and operation of the UPS.
• Review the safety precautions described below to avoid injury to users and damage
to the equipment.
• All power connections must be completed by a licensed electrician who is
experienced in wiring this type of equipment, and who is familiar with the local
electrical codes and regulations. Improper wiring may cause injury to
personnel, or death, or damage to the equipment.
• Ensure all power is disconnected before performing installation or maintenance.
• Leave at least 20 cm of clearance space between the ventilation openings of the UPS
and other objects or walls.
• The UPS must be well grounded to the building’s grounding system with a conductor
that has a current carrying capacity that matches the rating of the UPS.
• Battery installation, battery maintenance, and battery replacement shall be performed
only by authorized service personnel.
• Pay attention to all DANGER, CAUTION, and WARNING notices affixed to the inside
and outside of the UPS.
• Keep the surroundings clean, uncluttered and free from excess moisture.
• Keep the operating environment within the parameters stated in this document.
• Allow only qualified technicians to service the UPS. There are no user-serviceable
components. Do not try to repair it yourself!
• Use the UPS only for its intended purpose.
• The batteries should preferably be installed next to the UPS, or as close to it as is
practically possible.
WARNING - RISK OF LETHAL ELECTRIC SHOCK:
The battery cabinet contains a series of batteries that provides high voltage and
energy in the UPS body even when the UPS is not connected to the ac input.
Take appropriate precautions during installation, inspection and servicing.
To Next Page
Loading...
