Gamatronic power+ sa - Related Products; G4 and G-Eye Overview

GAMATRONIC ELECTRONIC INDUSTRIES LTD.
POWER
+
SA: 20, 30 and 40 kVA, Release 2.1
155
16.2 G-Eye
Figure 304: G-Eye
G-Eye adds value to your Power+:
• Option to connect external temperatures sensors, humidity sensors, and
frequency sensors.
• Inputs for ac/dc current and voltage measurements through various sensors.
• When the measured value moves outside a user-defined range, G-Eye
immediately informs pre-selected targets of the alarm condition.
• One 4-20 mA input.
• Input dry contacts available for on/off external sensors.
• Output dry contacts for control of external devices.
• Supports TCP/IP and SNMPv2.
• Controlled shutdown of servers on ac mains power failure, with user-defined
time-delay. (*)
• Auto-wake-up of servers on restoration of ac power, after user-defined time-
delay. (*), (**)
• Include internal GSM modem (quad-band) for additional
backup/control/management without LAN dependency.
• Bi-directional control via simple SMS commands.
• Automatic response to sensed events. For example, the G4 can be
programmed to turn on an air conditioner when it senses that the room
temperature has exceeded a user-defined level.
• Notifies designated targets of alarm conditions via email, SMS, and SNMP
traps.
• Double power feed for reliability.
• Internal battery backup.
• Quick installation.
(*) Not all operating systems supported.
(**) Auto-wake-up requires "wake-on_LAN" BIOS feature on target computers. Not all operating
systems supported.
Note: G-Eye requires disconnection of the Power+ internal network card. Consult your
vendor before ordering.