Gamatronic power+ sa - Figure 245: SC2012 Menu; Figure 246: SC2012 Menu; Figure 247: Network Menu; Figure 248: Setting an IP Address

GAMATRONIC ELECTRONIC INDUSTRIES LTD.
116
POWER
+
SA: 20, 30, and 40 kVA, Release 2.1
3. Select Factory settings:
[Main Menu > SETUP > (password) > Ent > Service > SC2012]
1> Restart controller 3> Network…
2> Factory settings 4> Reset MBX
Your selection: 1 5> --------------
Enter if you are sure (else press Esc.!)
Figure 245: SC2012 menu
Default settings are implemented, a confirmation screen appears briefly and then
the controller restarts.
4. Select Network:
[Main Menu > SETUP > (password) > Ent > Service > SC2012]
1> Restart controller 3> Network…
2> Factory settings 4> Reset MBX
Your selection: 1 5> --------------
Enter if you are sure (else press Esc.!)
Figure 246: SC2012 menu
5. Select Set IP ADDRESS:
[Main Menu > SETUP > (password) > Ent > Service > SC2012 > Network]
1> Set IP ADDRESS 157.211.000.253
2> Set GATEWAY 157.211.000.251
3> Set MASK 255.255.255.000
4> Store 5> SNMP factor Select:1
Figure 247: Network menu
6. Use the arrows keys to set an IP address and press Ent:
[Main Menu > SETUP > (password) > Ent > Service > SC2012 > Network > Set IP
ADDRESS]
Set IP ADDRESS
157.211.000.252
Figure 248: Setting an IP address