GAMATRONIC ELECTRONIC INDUSTRIES LTD.
146
+
SA: 20, 30, and 40 kVA, Release 2.1
11. SNMP AGENT
The Power+ SA controller includes an SNMP
1
agent that enables remote monitoring and
control of the Power+ SA, and automatic orderly shutdown of any servers powered by the
UPS. The SNMP agent provides connectivity between the UPS and external UPS
management software such as Gamatronic's PSM-AC Power+.
The SNMP agent provides information on request about present operating conditions,
including real-time measurements such as input and output voltages, currents, and
frequencies. In the event of a power outage, the SNMP agent can perform an automatic,
orderly shut down of Windows computer systems before the UPS batteries run out. (A small
shutdown client must be installed on each target computer).
The SNMP agent also provides real-time notification of UPS events in several modalities; for
example, via email or SMS (with the optional WING component connected to the system
controller).
The SNMP agent is intended for use with a UPS management software application such as
PSM-AC Power+, a sophisticated software suite for managing multiple power supplies and
UPS systems. PSM-AC Power+ is compatible with Windows, Unix, Linux, and Netware
servers. The systems can be controlled both locally and remotely.
Figure 298: POWER
+
PSM-AC lets you monitor and control your P
OWER+ SA
UPS
1
Simple Network Management Protocol
To Next Page
Loading...
