GE Voluson Swift User Manual

OmniView VolPre Menu
Figure 8-11 OmniView Premode Controls
Settings Select the desired user folder.
Method Four tracking line methods are available:
•
Line : straight line
•
Curve : curved line
•
Trace : freeform line
•
Polyline : freeform line from point to point
VCI Thickness Select the desired thickness (mm).
FPS Opt. On/off selection.
Quality This control improves the resolution by reducing the frame rate. Respectively it
reduces the resolution by increasing the image frame rate.
Vol. Angle Adjust the Volume Angle.
3D and 4D Mode
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 R
evision 4 8-19

GE Voluson Swift Specifications

General

Brand	GE
Model	Voluson Swift
Category	Medical Equipment
Language	English