GE Voluson Swift User Manual

P Permanent Option is permanently activated (purchased).
d disabled Option is disabled.
Figure 11-11 Options
Serial Number Shows the serial number of the System.
Demo Key This field is used to enter and show the demo key (all options are available for a
certain period of time) from OKOS.
Permanent Key This field is used to enter and show encoding key for permanent available options.
4D View License Export Options:
1. Select all connected USB drives from the Look in drop down menu list.
2. Choose Open or Cancel button.
3. If a .lic file is scelected, Open button is enabled. Close the Open File dialog by
pressing the Cancel button on the screen.
4. When the selected license file is valid, the file on the USB drive will be replaced
by a new file with the same name and the options from the device.
5. Close the message box and pop up the Open File dialog again by pressing the
OK button on the screen.
Installing a Demo- or Permanent Key
1.
Position the cursor inside the input field desired and press
Set .
2. If one exists, clear/edit the current key code.
3. Enter the encrypted serial code with the keyboard and then click on Submit (The code
will be checked.)
4. Click the
Save & Exit button.
Remark
•
After activating a key code, restart the system.
•
To Exit the System Setup without saving, click the
Exit button.
System Setup
11-18
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 R
evision 4

GE Voluson Swift Specifications

General

Brand	GE
Model	Voluson Swift
Category	Medical Equipment
Language	English