Activate
Activates Whitelisting. If
Password
or
Verify Password
are empty,
Activate
is
disabled.
Error messages appear, when
Password
and
Verify Password
do not match or are
less than 8 characters long.
Cancel
Press this button to cancel the add printer process.
OK
Press
OK
to add printer.
OK
is disabled, when
Password
is empty.
An error message appears, if the entered
Password
is incorrect.
Whitelisting
inactive
New Password
The entered password is not visible and has a minimum of 8 characters.
Change Password
Press to change password. If the password change is successful, a message is
displayed.
Change Password
is disabled, if
Password
,
New Password
or
Verify
Password
are empty.
Error messages appear, when entering a wrong password,
New Password
, and
Verify Password
do not match or are less than 8 characters long.
Deactivate
Deactivates Whitelisting.
Deactivate
is disabled, if
Password
is empty.
An error message is displayed, if the wrong password was entered.
Activate Whitelisting - Workflow
1. Enter
Password
and
Verify Password
.
2. Press
Activate
to activate Whitelisting.
3. Reboot the system to activate Whitelisting. After the device is restarted and the user is
installing a printer, a message box appears.
3.1.
Enter your Whitelisting password.
3.2.
Press
OK
to add a printer or cancel the process by pressing
Cancel
.
Note
If the device is not restarted and the user tries to install a printer, a message to reboot the
system appears.
Deactivate Whitelisting - Workflow
1. Enter
Password
.
2. Press
Deactivate
to deactivate Whitelisting.
3. Reboot the system to deactivate Whitelisting.
Note
If the device is not restarted and the user tries to install a printer, a message to reboot the
system appears.
11.2.3 Connectivity
Connectivity includes the sub menus:
•
Peripherals
•
Device Setup
•
Tricefy™
•
Button Configuration
•
Drives
System Setup
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 R
evision 4 11-23
To Next Page
Loading...
Need help?
General
