Figure 5-1 Probe immersion levels
Figure 5-1 Probe immersion levels
Probe maintenance intervals
The following maintenance schedule is suggested for probes and biopsy equipment to ensure
proper operation and safety.
Action Daily After / Before Each
Use
As Necessary
Inspect the Probes - X X
Clean the Probes X - X
Disinfect
endocavity probes
- X X
Disinfect all other
probe types
- - X
Environmental requirements for probes
Probes can be used in clinical environment.
Ensure that the probe face temperature does not exceed the normal operation temperature
range.
Probes must be operated, stored, or transported within the parameters outlined below.
Probes and Biopsies
5-6
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 R
evision 4
To Next Page
Loading...
Need help?
General
