17. Select a patient or exam and press
Import
to import the selected data into the local
archive. If the data is not imported, it is stored locally until a new exam is started. This
means that it is possible to switch back and forth between menus and modes, without
losing the query-data until a new exam is started. The locally stored temporary data is
also deleted upon reboot.
9.3.3.1 DICOM Details
DICOM Server Details
•
Port 105 is used for retrieving the images. (This needs to be configured on the remote
DICOM server.)
•
Only DICOM images that are marked as US (ultrasound) or “secondary capture” can be
retrieved. (No CT images for example.)
•
Only data that was requested by the Voluson™ SWIFT / Voluson SWIFT+ system is
accepted. It is not possible to request from a third system data to be sent to the
Voluson™ SWIFT / Voluson SWIFT+.
•
The port is only open during retrieve. During the retrieval the system is locked. It is not
possible to continue working while retrieving data from a remote server.
Note
Not possible to use DICOM Storage Commit and Query Retrieve with the same DICOM
Server. It is usual to receive images and storage commits both on port number 104.
9.3.3.2 Exam Application Details
The Clinical Application is set from the DICOM Image file. If more than one Clinical Application
is used in one exam, the Clinical Application is set from the last DICOM Image.
If no Clinical Application is included in the DICOM Image file or can be retrieved (e.g.
secondary capture), a default Clinical Application is set.
Archive
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 R
evision 4 9-15
To Next Page
Loading...
Need help?
General
