Audio-Modes: Stereo (both directions separately in both channels)
Audio Volume: Adjustable, control digipots
13.10.5 Color Doppler
Screen formats: 2D+CFM (single, dual, quad)
Frequency range 1-18 MHz ( depending on the probe, 3 steps high, mid, low)
Display modes:
•
Simultaneous dual mode: 2D/2D+CFM
•
Triplex mode: 2D+CFM/PW, 2D/M+MCFM
Color coding:
•
steps: 65536 color steps
•
Display modes:
○
V -T (velocity + turbulence)
○
V (velocity)
○
V-P (velocity + power)
○
T (turbulence)
○
P-T (power + turbulence)
Depth range:
•
axial: 0 to B scan range
•
lateral: 0 to B scan range
Baseline shift: 17 steps (independent from spectral Doppler)
Inversion of color direction: yes
Wall Motion Filter: 8 steps (low1, low2, mid1, mid2, high1, high2, max1, max2)
Smoothing Filter:
•
12 steps rising time
•
12 steps falling time
Gain control: +15dB to -15dB, 0.2dB steps
Line Density (color line
density):
10 steps
Ensemble (color shots per
line):
•
CFM: 7 to 31
•
MCFM: 8 to 16
Flow Resolution: 4 steps (low, mid1, mid2, high)
Pulse repetition frequency:
•
CFM: 100 Hz to 20.5 kHz
•
MCFM: 100 Hz to 20.5 kHz
Color Map: 8 different color codes for each probe
Balance: from 25 to 225
Max. meas. velocity: 4.23 m/sec.
Min. meas. velocity: 0.3 cm/sec.
Scale: kHz, cm/s, m/s
Automatic moving tissue
suppression:
yes
13.10.6 Power-Doppler
Screen formats: 2D+PD (single, dual, quad)
Frequency range: 1-18 MHz (depending on the probe, 3 steps high, mid, low )
Technical Data/ Information
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 R
evision 4 13-19