GE Voluson Swift

Figure 11-24 System Configuration
The
System Configuration can be saved to the following destinations:
•
D partition of internal hard disk
•
Mapped Network Drive Z
•
Any other drive connected to the system (e.g.; an external USB-hard disk)
Do not disconnect an external USB - device without stopping it. Disconnecting without
stopping can lead to data loss on the external device.
Small Backup (Scan Settings)
The Small Backup contains:
•
Image settings
•
Auto Text
•
Setup settings (language, date format, screensaver on/off, etc.)
Saving a Small Backup:
1.
Click Save and the Save window is displayed.
2. Choose the medium and click Save .
3. Select an already existing file or click on New File to create a new Backup.
4. Click OK and saving procedure begins. Click Cancel to exit without saving.
Loading a Small Backup:
1. Click Load and the Load window is displayed.
2. Choose the medium and click Load .
3. Select the appropriate file and click
OK . The Load option window appears.
4. Select the appropriate “Backup Data”.
System Setup
11-40
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 R
evision 4