9.2.1.1 Upload to Trice (DICOM Send)
Selected data is sent to the DICOM destination selected in the DICOM Config Dialog. If no
DICOM destination is selected in the DICOM Config Dialog, a dialog appears where the
destination can be seleted within a drop down menu with available destinations.
9.2.1.2 Email Send
It is possible to send data via e-mail.
Email Send
Send to
•
Patient
•
Performing physician
•
Referring physician
•
Sonographer
All recipients with an included email address at the
Patient ID menu are preselected. If no email address is
entered, an edit button appears. Selecting this button
opens the corresponding dialog.
Options
•
Request a Read Receipt
•
Request a Delivery Receipt
•
Send a Copy to me
The last selection shall be stored for the next Email Send.
Cc
An additional email recipient can be added. If no recipient
is selected, the "Cc" changes to "To"
Subject
Message
Enter a message or edit the previously stored one.
Subject & Message
A default subject and message (configured in the email
system setup) can be entered by clicking
Default
.
Clear
deletes the subject and the message input field.
Sending data
1.
Select the data to send. The Email Send window appears.
2. Select the sending criteria (receiver, options,...) and type in a message if desired.
3. Press
Send
to send the data or
Cancel
to cancel the process.
9.2.2 Print
It is possible to print US data. Therefore select
Print
. The printing dialog appears.
Note
Although the menu looks the same as the menu in System Setup, this Printer Settings menu is
solely for print jobs initiated with the Px buttons or from Archive. If you want to edit printer
settings for print jobs initiated with the End Exam button, please refer to
'Button Configuration'
on page 11-34.
Archive
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 R
evision 4 9-7
To Next Page
Loading...
Need help?
General
