Figure 8-21 3D Slice Cine Menu
Step Size
Defines the amount of translation between adjoining 3D images.
Ref. Image
Select the reference image to which all image dependent functions like parallel
shifts, rotations, etc. are applied.
Calculate Cine Sequence
Start the calculation of the cine sequence.
1. Select the
Step Size
.
2. Select the
Ref. Image
.
3. Select the
Calculate
button.
Calculating a cine sequence
Image after image of the sequence is calculated and stored in the cine memory. After the
calculation is finished the cine sequence is displayed on the screen.
Pressing the
Break Cine calculation
button stops the cine calculation. The images that have
been calculated before the calculation has been stopped are displayed as a sequence.
Cine replay menu
Replay mode
•
Replay the sequence from start to end.
•
Replay the sequence from start to end and backwards.
Start/Stop
Toggle between playback and stop.
New Cine sequence
Start a new cine sequence or change the cine type.
1. Calculate a cine sequence.
2. The cine replay menu appears.
3D and 4D Mode
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 R
evision 4 8-33
To Next Page
Loading...
Need help?
General
