Note
Sleep mode is available in battery mode and AC power mode. Once the battery runs out the
system will not operate. To turn on the system, the user needs to connect the AC power. The
sustaining time of sleep mode will be reduced due to the battery capacity being decreased by
the number of usage.
Note
Use the Sleep mode when the battery capacity is sufficient. Otherwise, unexpected problems
may occur.
Shutdown dialogs
The shutdown dialogs can vary depending on the processes that may be active.
1. Normal shutdown options
•
Shut down
•
Restart
•
Reset Monitor
•
Sleep
2. If a software upgrade is available, a
Download
button will be displayed.
For more
information see
'Software Update'
on page 2-30.
3. If remote service is running or image data is being transferred, a message will be
displayed to inform the user that shutdown or restart is not recommended.
4. If a process is running that cannot be stopped, the user will be informed that shutdown is
not possible.
4.2 Getting started
Connecting a probe
1. Plug the probe connector into a free socket.
2. Push the probe lock-handle knob to left direction. Ensure that the probe sits tight.
3. Place the probe cable in the cable holder.
Selecting a probe
1. Slide up the probe menu on the bottom left.
2. The connected probes are appeared on the touch monitor.
3. Click the desired probe. Selected probe turns green or selected theme color.
4. Select a Folder (Application) and a Preset.
5. The 2D Main Menu appears on the left side of screen.
6. Perform the scan.
Info
The Voluson™ SWIFT / Voluson SWIFT+ is delivered with recommended factory default
presets. Individual user presets can be stored.
Info
Long press the icon beside the probe menu and save to quickly access probe favorites. This
function supports up to 3 presets.
Info
If the favorite probe is not connected, the message box appears when press the probe favorite
button.
Getting started
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 R
evision 4 4-3
To Next Page
Loading...
Need help?
General
