Caution
The IOTA ADNEX model should not be used without an independent clinical evaluation and is
not intended to be a screening test or to determine whether a patient should proceed to
surgery. Incorrect use of the IOTA ADNEX model carries the risk of unnecessary testing,
surgery, and/or delayed diagnosis.
Workflow
1.
Select the IOTA ADNEX model on the Gynecology worksheet touch panel.
2. Fill in all items (i.e.
Patient Age
,
Maximal diameter of the lesion
,...). If a value entered is
out of the corresponding range, a message with the valid range is displayed.
3. Press
Calculate
as soon as all items are filled.
Note
It is possible to calculate the result without filling in the Serum CA-125 level. A message
appears asking whether to continue (Yes) or not (No).
4. The IOTA ADNEX result is displayed. It consists of several parts showing the
Baseline
Risk
,
Patient specific risk
and
Relative risk
for several values. An additional page with a
graphical display of the IOTA ADNEX Model result is available.
Figure 10-11 Baseline Risk
Figure 10-12 Patient risk (only available when a result exists)
Measurements and Calculations
10-28
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 R
evision 4
To Next Page
Loading...
Need help?
General
