UCM6100 Series User Manual
Version 1.0.18.13
Assign permission level to the user. The available permissions are “Internal”, “Local”,
“National” and “International” from the lowest level to the highest level. The default
setting is “Internal”.
Note: Users need to have the same level as or higher level than an outbound rule’s
privilege in order to make outbound calls from this rule.
Configure Voicemail. There are three valid options and the default option is "Enable
Local Voicemail".
• Disable Voicemail: Disable Voicemail.
• Enable Local Voicemail: Enable voicemail for the user.
Configure the SIP/IAX password for the users. Three options are available to create
password for the batch of extensions.
• User Random Password.
A random secure password will be automatically generated. It is recommended
to use this password for security purpose.
• Use Extension as Password.
• Enter a password to be used on all the extensions in the batch.
Configure Voicemail password (digits only) for the users.
• User Random Password.
A random password in digits will be automatically generated. It is recommended
to use this password for security purpose.
• Use Extension as Password.
• Enter a password to be used on all the extensions in the batch.
Configure the number of seconds to ring the user before the call is forwarded to
voicemail (voicemail is enabled) or hang up (voicemail is disabled). If not specified,
the default ring timeout is 60 seconds on the UCM6100, which can be configured in
the global ring timeout setting under Web GUI→PBX Settings→Voice
Prompt→Custom Prompt: General Preference. The valid range is between 5
seconds and 600 seconds.
Note:
If the end point also has a ring timeout configured, the actual ring timeout used is the
shortest time set by either device.
Enable automatic recording for the calls using this extension. The default setting is
disabled. The recording files can be accessed under Web GUI→CDR→Recording
Files.
Skip Voicemail
Password
Verification
When user dials voicemail code, the password verification IVR is skipped. If enabled,
this would allow one-button voicemail access. By default, this option is disabled.
Select which Music On Hold class to suggest to extensions when putting them on
hold.