UCM6100 Series User Manual
Version 1.0.18.13
If this option is enabled, conference call will be recorded in .wav format. The
recorded file can be found from Conference page.
If this option is enabled, the notification tone or voice prompt for joining or leaving
the conference won’t be played.
Note:
Option “Quiet Mode” and option “Announce Caller” cannot be enabled at the same
time.
If this option is enabled, the participants in the conference won’t be able to hear
each other until conference administrator joins the conference.
Note:
If “Quiet Mode” is enabled, voice prompt for this option won’t be played.
If this option is enabled, the user can:
• Press ‘0’ to invite others to join the conference with invited party’s
permission
• Press ‘1’ to invite without invited party’s permission
• Press ‘2’ to create a multi-conference room to another conference room
• Press ‘3’ to drop all current multi-conference rooms.
Note:
Conference Administrator is always allowed to access this menu.
If this option is enabled, when a participant joins the conference room,
participant’s name will be announced to all members in the conference room.
Note:
Option “Quiet Mode” and option “Announce Caller” cannot be enabled at the same
time.
If this option is enabled, no authentication is required for entering the conference
room.
Note:
Please be aware of the potential security risks when turning on this option.
If this option is enabled, UCM6100 will play Hold Music while there is only one
participant in the conference room or the conference is not yet started.
Skip Authentication
When Inviting Users
via Trunk from Web
GUI
If this option is enabled, the invitation from Web GUI via a trunk with password
won’t require authentication.
Note:
Please be aware of the potential security risks when turning on this option.
To Next Page
Loading...
Need help?
General
