Hioki 3153 - Page 183

170
_____________________________________________________________________________________________
10.3 RS-232C Command Reference
______________________________________________________________________________________________
Syntax
∗TST?
Response
syntax
<data>
<data>
0to3
(NR1)
Function
Performs the self test of the 3153, and returns the result thereof as a numerical value in NR1
format between 0 and 3.
0
: No error
1
: A ROM error occurred.
2
: A RAM error occurred.
3
: ROM and RAM error occured.
Example
Requests execution of, and queries the result of, the self test.
Transmission ∗TST?
Response 3
A ROM error (bit 0) and a RAM error (bit 1) have occurred.
Error
If the response message is longer than 300 bytes, a query error occurs.
The execution of this command in a state other than the READY state causes an execution error.
∗TST?
Requests execution of, and queries the result of, the self test.