Hioki 3153 - Page 208

195
_____________________________________________________________________________________________
10.3 RS-232C Command Reference
______________________________________________________________________________________________
Syntax
:MEMory:INSulation:SAVE <data>
<data>
1to10
(NR1)
Function
Saves the current insulation-resistance test settings in the memory file specified in <data>.
Example
Saves insulation-resistance test data to memory file 2.
Transmission :MEMory:INSulation:SAVE 2
Error
The execution of this command in a state other than the insulation-resistance mode READY state
causes an execution error.
The execution of this command in the withstand-voltage mode and program mode also causes an
execution error.
An execution error occurs when file numbers other than 1 to 10 are specified.
Syntax
:MEMory:INSulation:CLEar <data>
<data>
1to10
(NR1)
Function
Clears and resets the data saved for the insulation-resistance test specified in <data>.
Example
Clears the insulation-resistance test data saved to memory file 3.
Transmission :MEMory:INSulation:CLEar 3
Error
The execution of this command in a state other than the READY state causes an execution error.
An execution error occurs when file numbers other than 1 to 10 are specified.
:MEMor
y
:INSulation:SAVE
Saves data for insulation-resistance tests to memory files.
:MEMor
y
:INSulation:CLEar
Clears the insulation-resistance test data saved to memory files.