7 Results
301-7146 English Rev B 11/02/2011 Operator’s Manual NA 120
Search by Sequence Number
1. To search specimens within a sequence range:
• Enter the first specimen sequence # in the From edit box.
• Enter the last specimen sequence # in the To edit box.
• Click OK.
2. To search a specific sequence #:
• Enter the sequence # in the From edit box.
• Click OK.
Search by Operator ID
1. To search specimens released by a specific operator:
• Use the pull down button to select the operator ID.
• Click OK.
2. To search specimens released for all operators:
• Leave the field blank to obtain a complete search.
2. Click OK.
Search by date-time (range)
To Next Page
Loading...