8 Maintenance & Service
301-7146 English Rev B 11/02/2011 Operator’s Manual NA 161
Alarm 21
One or more of the following has
occurred:
• A setting has been changed
which requires restarting the
system for the change to take
effect.
• A microscopy or chemistry
system has experienced an
Restart the system.
Alarm 36
The Chemistry System
encountered an error.
This condition must be remedied
for the instrument to run more
specimens.
Restart the instrument.
If the failure persists, turn off the
power and contact your distributor.
To Next Page
Loading...