3 Setup
301-7146 English Rev B 11/02/2011 Operator’s Manual NA 49
Restore Button
This option can be used to restore setting change directly from the View
Log.
1. From the list, select the change to restore, and then click the Restore
button. The setting will be restored to its previous state.
2. The system signals that a restart is necessary.
Restore… Button
This option can be used to restore setting from a source other than the
Settings Log, for example a USB drive; see Save as… Button.
1. Click the Restore… button, a Windows screen is displayed.
2. Select the source where the setting change was saved.
3. Select the file with a .slf extension, and then click the Open button.
The setting will be restored to its previous state.
4. The system signals that a restart is necessary.
Save as… Button
This option can be used to save setting change to a source other than the
Settings Log, for example a USB drive.
1. From the list, select the change to save, and then click the Save
as… button, a Windows screen is displayed.
2. Select the destination where the setting change will be saved, the
default is the Logs folder.
3. If necessary, change the name of the file, for example the setting
parameter that was changed, and then click the Save button.
4. The setting change can be retrieved to restore the previous setting;
see Restore… Button.
To Next Page
Loading...