9 iWARE
™
Expert System
301-7146 English Rev B 11/02/2011 Operator’s Manual NA 189
NOTE: Comment associated with the tagging can only be inserted from
the Rule screen.
4. Check the rules for which the selected tagging will apply.
5. When tagging is completed, click the Save button.
6. Click the Rule button to return to the Building Custom Rules screen.
7. Click the Close button to return to the Settings screen.
Tagging from the Building Custom Rules Screen
1. From the Building Custom Rules screen, select the rule to be
tagged.
2. Select the checkbox for the tagging selection. See Tagging Options
for more information.
3. It is necessary to type a comment in the associated comment field.
The comment will be added to the selected tagging.
4. When tagging is completed, click the Save button.
5. Click the Close button to return to the Settings screen.
To Next Page
Loading...