3 Setup
301-7146 English Rev B 11/02/2011 Operator’s Manual NA 74
Sequence Number
A sequence number is assigned to samples and functions as a counter of
the number of samples that are run on the system. The sequence number
is displayed on the Specimen Results screen, and is displayed and
printed on the specimen report.
The Sequence button, located on the bottom right of the Instrument
screen, gives access to a Sequence number screen into which the next
sequence number to be used can be entered. The initial sequence
number that can be entered must be comprised between 0 and
2147483647.
To Next Page
Loading...