3 Setup
301-7146 English Rev B 11/02/2011 Operator’s Manual NA 46
Settings Screen
NOTE: Only a Manager can modify the user-defined settings. Any user
can view the settings.
1. To access the Settings menu, click on the Instrument button on the
top right side of the main screen.
2. Click on the Go off line button.
3. A Confirm window pops up (with warnings). Click Yes.
4. Click on the Settings button located at the bottom of the Instrument
screen.
The following options are available for user-defined settings:
• Operator Accounts
• Lab Information
• System Configuration
• LIS Interface
• Chemistry
• QC
• Specimen
To Next Page
Loading...