3 Setup
301-7146 English Rev B 11/02/2011 Operator’s Manual NA 71
Specimen Settings
The Specimen screen allows the user to control whether barcode scan
failures are flagged or not.
Flag barcode scan failures
1. If checked, barcode scan failures will be flagged as ID_ERROR.
2. If unchecked, the condition will not be flagged and the specimen will
be assigned an identifier consisting of underlines. If unchecked, “Skip
specimen if ID scan fails” will be also unchecked. This option is not
compatible with Manual Orders.
Enable detailed audit trail
If checked, this option will indicate, inside the Audit Trail field of the
report, any changes that were made to the results, including the name of
the user that made these changes.
This option must be selected in order to edit chemistry results; see
Editing Results.
To Next Page
Loading...