8 Maintenance & Service
301-7146 English Rev B 11/02/2011 Operator’s Manual NA 158
Defragment button
This function can be used when the computer performance is slow.
1. The system must be off line to perform a Defragmentation. If the
system is on line, from the Instrument screen, click on the Go off line
button.
NOTE: Before running a Defragmentation, it is recommended to run a
Check Disk, see Check Disk.
2. From the Instrument screen, select Maintenance.
3. From the Maintenance screen, select Defragment.
4. The Disk Defragmenter screen is displayed.
To Next Page
Loading...