8 Maintenance & Service
301-7146 English Rev B 11/02/2011 Operator’s Manual NA 141
8. Manually, rotate the black stabilizer bar to the left towards the
extractor.
CAUTION: Use only lint free tissues. Using a humid paper towel inside
the Strip Provider Module will affect the results of the test strips.
9. Using a dry, lint free tissue, collect and remove all dust from the front-
and rear disks using downward motion. Replace the wipe every time
dust is collected.
10. Using a dry, lint free tissue, wipe collect and remove all dust from the
lower body in the direction away from the extractor. Do not to push
any dust inside the extractor. Replace the dry lint free wipe every time
dust is collected.
To Next Page
Loading...