3 Setup
301-7146 English Rev B 11/02/2011 Operator’s Manual NA 57
3. Use the pulldown button to select the primary chemistry system and
settings to install.
4. Click the OK button to install the chemistry settings and return to the
System Configuration screen.
5. Click the OK button.
6. The system will prompt to restart the software. From the Instrument
screen, click the Maintenance button, and then click the Restart
button.
7. When the system restarts, from the Instrument screen, click the Go
off line button. Click the Settings button.
a. If the chemistry settings need to be personalized: click the
Chemistry button and edit the chemistry settings as
necessary. When completed, click the OK button. The system
will prompt to restart the software. From the Instrument
screen, click the Maintenance button, and then click the
Restart button.
b. If the chemistry settings do not need to be edited: click the
System Configuration button.
To Next Page
Loading...