Konica Minolta SONIMAGE HS2

To Next Page

To Previous Page

231

6.4 Transferring Image Data

Chapter 6

To send to the DICOM Storage Server

Select an image to be sent from the image display area on the [Review] screen.

• Select an image by touching it.

Press the [Export Image] button in the control area.

• The [Export Image] screen is displayed.

Select [DICOM Format], and then the destination server from the pull-down menu for [Export to].

Press the [Export] button on the [Export Image] screen to execute.

• It will be registered on the DICOM Joblist and be sent to the DICOM Storage Server.

HINT

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

• You can also send it by pressing the [Export Image] button in the control area on the [Review] screen and selecting

the destination server.

Refer to "Sending to the DICOM Storage Server" of the "Operation Manual: Applications".

• If you run out of free space on the external storage medium when Export Format is [PC Format], a free space short-

age dialog will be displayed. At this time, you can continue outputting the image by connecting a di󰀨erent external

storage medium that has enough free space and pressing [Continue].

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

Reference

• For detail of [Review] screen, refer to "Review Screen" of the "Operation Manual: Applications".

Konica Minolta SONIMAGE HS2 - Page 231