295
11.2 Error Code List
Chapter 11
Continued on the next page
Error code Display message Phenomenon / Solution
CA0A001
Failed to export.
This System is busy.
Please output after rebooting the system.
CA0A002 The device is not ready. Please remove and insert the device again.
CA0A003 The specied device cannot be writen.
Please conrm the lock/unlock status of the device. If
locked, please unlock the device and reinsert it.
CA0A004 There is not enough free space on the device. Please make more free space and then reinsert the device.
CA0A005 Failed to delete. Please try again.
Please try again. If an error has occurred again, please try
again after rebooting the system.
CA10001 A command with the same name already exists.
A command with the same name has been registered. Do
the registration again.
CA10002 Intonation le settings failed. Failed to set intonation le. Do the registration again.
CA10003 Can't add any more commands.
The number of registered commands has reached the up-
per limit. Delete other commands and then do the registra-
tion again.
CA16001
DO NOT use the Biopsy during the battery-pow-
ered operation.
Please connect the AC adapter and then use the Biopsy.
CA1F001
System may exceed the MI/TI/Ispta.3 described
in the user’s manual. Transmission voltage was
lowered.
The system can be used as is. If you have the error again,
please contact your service representative.
CA1F002
System error has occurred.
please contact your service representative.
Please contact your service representative.
CA2B001
The system has failed to load User Account Set-
tings les. The system has been unstable.
Are you sure you want to restore to the default
setting?
Please select [Yes] and set User Account again.
CA60001
An internal error has occurred.
If an error has occurred again after rebooting,
please contact your service representative.
Please reboot the system.
If an error has occurred again after rebooting, please con-
tact your service representative.
CA60002
Database connection was failed.
So that system is unstable, please reboot the
system.
CA60003
External storage device was failed to be ejected.
Please disconnect the external storage device
after shutting down the system.
Please disconnect the external storage device after shutting
down the system.
CA61001
The required tag or data is not found.: [tag name]
Please check the connected device.
Please contact your service representative.
CA61002
Internal parameter error has occurred.
Please contact your service representative.
Please contact your service representative.
CA62003 Store Error.
Please start a new study to store images. If a store error
occurs again, try again after rebooting the system.
To Next Page
Loading...