Global P0: Basic Setup 0–2: System Preference
197
In some cases, the animation will be disabled
automatically when large amounts of performance data
is being processed by the drum track or sequencer.
Value Edit Pop-up [Off, On]
On (checked): A popup will appear when you hold down
or press twice on an edit cell, knob, or slider.
Off (unchecked): A popup will not appear.
REALTIME CONTROLS Pop-up [Off, On]
On (checked): A popup will appear when you operate the
front panel REALTIME CONTROLS knob.
Off (unchecked): A popup will not appear.
In some cases, popup display will be disabled
automatically when large amounts of performance data
is being processed by the drum track or sequencer.
0–2b: Memory Protect
Program [Off, On]
This setting protects the internal program memory.
On (checked): Internal program memory will be protected,
and the following write operations cannot be performed.
• Writing a program
• Loading preloaded program data
• Loading program data from media
• Receiving program data via MIDI data dump
Off (unchecked): Data can be written to internal program
memory.
Combination [Off, On]
This setting protects the internal combination memory.
On (checked): Internal combination memory will be
protected, and the following write operations cannot be
performed.
• Writing a combination
• Loading preloaded combination data
• Loading combination data from media
• Receiving combination data via MIDI data dump
Off (unchecked): Data can be written to internal
combination memory.
Song [Off, On]
This setting protects the internal song memory.
However, when the power is turned off, the song data in
song memory will be lost regardless of this setting.
On (checked): Internal song memory will be protected, and
the following write operations cannot be performed.
• Recording to the sequencer
• Loading preloaded song data
• Loading song data from media
• Receiving song data via MIDI data dump
Off (unchecked): Data can be written to internal song
memory.
Drum Kit [Off, On]
This setting protects the internal drum kit memory.
On (checked): Internal drum kit memory will be protected,
and the following write operations cannot be performed.
• Writing a drum kit
• Loading preloaded drum kit data
• Loading drum kit data from media
• Receiving drum kit data via MIDI data dump
Off (unchecked): Data can be written to internal drum kit
memory.
Arpeggio User Pattern [Off, On]
This setting protects the internal user arpeggio pattern
memory.
On (checked): Internal user arpeggio pattern memory will
be protected, and the following write operations cannot be
performed.
• Writing a user arpeggio pattern
• Loading preload arpeggio pattern data
• Loading user arpeggio pattern data from media
• Receiving user arpeggio pattern data via MIDI data dump
Off (unchecked): Data can be written to internal user
arpeggio pattern memory.
V
0–2: Menu Command
•0: Write Global Setting see p. 216
•1: Load Preload/Demo Data see p. 216
•2: Change all bank references see p. 216
•3: Display Setup see p. 216
•4: Touch Panel Calibration see p. 217
•5: Half Damper Calibration see p. 217
•6: Update System Software see p. 218
For more information, please see “Global: Menu Command”
on page 216.
To Next Page
Loading...
