11-18
Troubleshooting > Responding to Messages
Removable memory
error.
Is writing to a removable
memory prohibited?
An error occurred in the removable
memory. The job stopped. Select
[End].
The error cord is as follows.
01: Connect a removable memory
that can be written to.
-
- An error occurred in the removable
memory. The job stopped. Select
[End].
The error cord is as follows.
01: The amount of data that can be
saved at once has been exceeded.
Restart the system or turn the
power OFF/ON. If the error still
occurs, the removable memory is
not compatible with the machine.
Use the removable memory
formatted by this machine. If the
removable memory cannot be
formatted, it is damaged. Connect
a compatible removable memory.
7-10
Removable Memory
is full.
- Job is canceled. Select [End].
Insufficient free space in the
removable memory. Delete
unnecessary files.
-
Remove originals in
the document
processor.
Are there any originals left in the
document processor?
Remove originals from the
document processor.
11-41
Replace all originals
and press
[Continue].
- Remove originals from the
document processor, put them
back in their original order, and
place them again. Select
[Continue] to resume printing.
Select [Cancel] to cancel the job.
-
Replace MK. - Replacement of the parts in the
maintenance kit is necessary at
every 200,000 pages of printing
and requires professional
servicing. Contact your Service
Representative.
-
Running security
function...
- Running security function. Please
wait.
-
Error Message Checkpoints Corrective Actions Reference
Page
To Next Page
Loading...
Need help?
General
