11-19
Troubleshooting > Responding to Messages
S
Error Message Checkpoints Corrective Actions Reference
Page
Scanner memory is
full.
- Scanning cannot be performed due
to insufficient memory of scanner.
Only one copy of the scanned
pages is available. Select
[Continue] to print, send or store
the scanned pages. Select
[Cancel] to cancel the printing job.
The machine may reproduce the
same originals by arranging the
following settings:
-Reduce the number of originals to
be scanned at once.
Furthermore, the machine may
reproduce the same originals by
arranging the following settings:
- Select [Copy Priority] of "Optional
Memory" in [System Menu].
Before changing the "Optional
Memory" setting, contact your
administrator.
8-53
Scheduled sending
jobs exceeded.
- The number of jobs has exceeded
the limit set for delayed
transmission. Select [End]. The job
is canceled.
Wait until the delayed transmission
is executed, or cancel the delayed
transmission and then perform the
job again.
-
Send error. - An error has occurred during
transmission. The job is canceled.
Select [End].
Refer to Responding to Send Error
for the error code and corrective
actions.
11-22
Set cassette. Have the paper width guide and paper
length guide been loaded properly?
Load the paper width guide and
paper length guide properly so that
there is no space between the
guides and the paper.
-
Shake the toner
container.
- Open the front cover of the
machine and pull out the toner
container indicated on the screen.
Shake the toner container well and
reinstall it.
-
To Next Page
Loading...
Need help?
General
