12-5
Appendix > Optional Equipment
2 With the memory connection terminals pointing toward the socket, align the cut-out part of the memory with the
tab of the socket and insert the memory at an angle.
3 Carefully swing the inserted memory towards the machine.
4 Replace the covers you removed at the beginning of this procedure.
Removing Expansion Memory
To remove Expansion Memory that has been installed, remove the machine's right cover. Carefully press the two
stoppers of the socket, and then remove the Expansion Memory from the socket.
Checking Expansion Memory
Improperly installed Expansion Memory will cause the following message to appear: "Machine Failure". Re-install the
memory to clear the error. You can check whether or not Expansion Memory is properly installed by printing a status
page.
[Print Report] (8-5)
Before inserting memory, check to make sure that the machine power switch is in the off
position.
To Next Page
Loading...
