EasyManua.ls Logo

Larson Davis 831 - Optional Accessories

Larson Davis 831
548 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Model 831 Manual Optional Accessories 1-5
• WS001 3 1/2” Windscreen
• 4 Rechargeable AA NiMH batteries
Other
• Lanyard
Optional Accessories
Microphones
• 1/2” free-field pre-polarized microphone, 50 mV/Pa
• 1/2” random incidence pre-polarized microphone,
50 mV/Pa
• 1/4” free-field pre-polarized microphone, 4 mV/Pa,
for higher level and/or higher frequency
measurements (ADP043 adaptor required)
• 1/4” pressure pre-polarized microphone, 1.6 mV/Pa,
for higher level and/or higher frequency
measurements (ADP043 adaptor required)
Microphone Preamplifiers
• 1/2” ICP Low Noise Microphone Preamplifier
(requires adaptor ADP074)
• PRM2103 Outdoor Microphone Preamplifier
• PRM426A12 Outdoor Microphone Preamplifier
• 426A12-NPT Coupler, 1.5”X27”ISO228-1 to NPT
thread
Environmental Protection
• EPS2116 Environmental Shell, protects microphone
and preamplifier from rain and wind with mounting
options for pipes, poles, and most tripods
• EPS2106-2 Environmental Shell, protects
microphone and preamplifier from rain and wind
and used with tripod TRP003
• EPS2108-2 Environmental Shell, protects
microphone and preamplifier from rain and wind
and used with tripod TRP002
• EPS029-831 Weather-proof enclosure for remote
noise monitoring; includes two batteries and
microphone mast

Table of Contents