Model 831 Manual Upgrade Firmware and Options 26-1
CHAPTER
26
Upgrade Firmware and
Options
This chapter describes the procedure for upgrading the
Model 831 firmware and/or options.
G4 LD Utility
In addition to G4 software, SLM
Utility-G3 software can be used to
install firmware and option
upgrades. Refer to the SLM Utility-
G3 Software manual for more
information.
G4 LD Utility (G4) is used to install firmware and option
upgrades, as well as providing remote control of the Model
831 and downloading data to the PC.
Access the Larson Davis website to see if you are using the
most recent version. If not, download the latest version from
the website or call technical support.
The firmware will be in a zip format. Unzip the file and copy
the folder “CD” to the desktop and run setup.exe in the CD
folder. Follow the instructions to install the upgrade.
Insert G4 LD Utility software CD and download on to your
machine. Once download is complete, launch G4. The
shortcut will be on the desktop. Double click this shortcut to
launch the software.
To Next Page
Loading...
