Model 831 Manual Memory Utilization 25-1
CHAPTER
25
Memory Utilization
This chapter presents formulas to calculate the amount
of memory used by the parameters which can be stored
to internal or USB memory.
Out Of Memory Stop
In order to ensure that all measured data can be stored, the
Model 831 will be stopped automatically when the amount
of available memory drops to 1 MB.
Overall Data
Each overall data block stored when performing a “Save
File” operation will utilize memory as follows:
• Without Spectral Ln enabled: 27 kB
• With Spectral Ln enabled: 307 kB
Session Log
The amount of memory utilized, in bytes, when storing a
session log is calculated as follows:
52 + 12 *(Number of records)
where Number of records includes the following:
•Run
•Pause
•Stop
• Voice Message
• Markers
• Sound Recording.
To Next Page
Loading...
