17-10 Data Explorer Model 831 Manual
a Move All to USB is performed. This time the files stored
to the USB Flash Drive have a name conflict and will
actually be stored as 08010700.LD1 through
08011300.LD1. At the third location we do the same thing
and now the USB Flash Drive has 08010700.LD2 through
08011300.LD2 added to it.
Refresh List
The Refresh List menu item will refresh the file list on the
Data Explorer Page.
Load Settings
Using the Load Settings Menu item, a new measurement
may be run with the exact same parameters as the selected
measurement. When
5 is pressed, the parameters from the
selected measurement are loaded so a new measurement
may be made. This is a convenient method to duplicate a
previous measurement.
Jump to Beginning
The Jump to Beginning menu item will select the first data
file listed.
Jump to End
The Jump to End menu item will select the last data file
listed.
To Next Page
Loading...
