EasyManua.ls Logo

Larson Davis 831 - Page 533

Larson Davis 831
548 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
D-8 Glossary Model 831 Manual
in the table below.
Standard: ANSI S12.19
Far Field There are two types of far fields: the acoustic far field and
the geometric far field.
Acoustic Far Field: The distance from a source of sound is
greater than an acoustic wavelength. In the far field, the
effect of the type of sound source is negligible. Since the
wavelength varies with frequency (See the definition of
Wavelength), the distance will vary with frequency. To be in
the far field for all frequencies measured, the lowest
frequency should be chosen for determining the distance.
For example, if the lowest frequency is 20 Hz, the
wavelength at normal temperatures is near 56 ft. (17 m); at
1000 Hz, the wavelength is near 1.1 ft. (1/3 m). See the
definition of Acoustic Near Field for the advantages of being
in the acoustic far field.
Geometric Far Field: The distance from a source of sound is
greater than the largest dimension of the sound source. In the
far field, the effect of source geometry is negligible. Sound
sources often have a variety of specific sources within them,
such as exhaust and intake noise. When in the far field, the
sources have all merged into one, so that measurements
made even further away will be no different. See the
definition of Geometric Near Field for the advantages of
being in the geometric far field.
Free Field A sound field that is free of reflections. This does not mean
that the sound is all coming from one direction as is often
assumed, since the source of sound may be spatially
extensive. See the definitions of near and far fields for more
detail. This definition is often used in conjunction with
reverberant field.
Frequency (Hz, rad/sec) The rate at which an oscillating signal completes a complete
cycle by returning to the original value. It can be expressed
in cycles per second and the value has the unit symbol Hz
(Hertz) added and the letter f is used for a universal
descriptor. It can also be expressed in radians per second,
Exchange Rate, Q Exchange Rate
Factor, q
Exposure Factor, k
3.01 10 1
4 13.29 .75
5 16.61 .60
6.02 20 .50

Table of Contents

Related product manuals