8-10 824 Reference Manual 9/13/00
Histograms Highest Level (120) Selects the highest Peak2 histogram level to be printed.
Resolution (5.0) Selects the Peak2 histogram resolution
Summary Report Template (SSA instrument)
Summary Report Template (LOG instrument)
Report Settings
Lower Level
Report Settings Description
Unformated [No] A dump of all
Read
,
Quer
y and
Interva
l remote commands.
Multiple values are comma delimited.
Data Report [Yes] This shows general information such as Leq, SEL, Dose, Projected Dose,
Lmin, Lmax, Peak, Ln’s, exceedance, and calibration logs.
Log Report [Yes] The run/stop log and with the date and time of each run/stop.
Setup Report [No] Print the settings and their values for the LOG instrument.
SPL Histogram [No] Shows 6 Ln values, Lmax, Lmin, and a bargraph of the level distribution.
Excd Report [No] ListsNumber of Record, ExchangeRate, Minimum Duration Time,
Period, Mode, Start Time, Leq, Max, Peak, Overloads, Unweighted Peak,
Duration, SEL, and Spectrum.
Intv Report [No] Leq, SEL, Lmin, Lmax, Peak, Uwpk, exceedances, time, date, and dura-
tion in the short report. The Long reports adds the Ln values for the
Interval period.
Hist Report [No] Leq for each time history period.
Daily Report [No] Lists date, duration, Leq, Peak, Uwpk, Ldn, Lmax, CNEL, and Lmin.
To Next Page
Loading...
