Larson Davis System 824 - Page 449

9/12/00 B-51
Commands Instrument
Type
Description Comments
I0, I101 RTA or variable greater that 4 will run
macro by default.
I1 SSA, LOG,
RTA, FFT,
TAL
Date and Time of Occurance ddmmmyy hh:mm:ss
I2 SSA, LOG,
TAL
Duration hh:mm:ss / mm:ss.ss
I2 RTA Number of Samples Averaged nnnn
I2 FFT Count nnn
I3 SSA, LOG TWA nnn.n dB
I3 RTA Spectral or Flat Level (n=ANSI
filter#)
nnn.n dB
I3 FFT OVER LOAD cccc
I3 TAL Overload Counts nnn
I4 SSA, LOG SEL nnn.n dB
I4 RTA Note Field cccccccc
I4 FFT Overall Level nnn.n
I4 TAL Mode [SLM | RTA | Tonal]
I5 SSA, LOG Lmin nnn.n dB
I5,n FFT FFT Line Level (n=0 to 400) nnn.n
I5,n RTA RTA Live Spectrum Level nnn.n dB
I6,n RTA RTA Leq Spectrum Level nnn.n dB
I6 SSA, LOG Lmax nnn.n dB
I7 SSA, LOG Lpeak nnn.n dB