3-20 824 Reference Manual 11/8/00
The revision number indicated by
“REV:” is changed when any firm-
ware code change is made. The revi-
sion number indicated by “SLM:” is
changed only when a firmware code
modification is made that affects the
accuracy of any SLM measurement
data, and is used as an indicator to
those who use third party verifica-
tion (NIST or PTB, etc.) of instru-
ment performance that testing
should be performed.
Pressing the
r
key moves to the
About-b
screen. The fol-
lowing appears:
The
About-b
display shows the instrument’s custom name
and title fields printed on System 824 reports. The fields are
generally set to the owner’s name and address. The name is
displayed at “power on” and printed on reports to customize
them to your business.
About Settings edit mode can also be
edited by pressing the
c
key from
the About display screens (previ-
ously described).
To modify the
About
settings, use the
u
or
d
key to
select
About
from the
Tools
menu, then press the
r
key.
The
About
setting offers three
Name
fields and one
Title
field for use on System 824 reports.
Company Name, Address Line 1, Address Line 2-
There
are three lines available for user specific data. Each field
provides 30 alpha/numeric characters, and is used to
describe the instrument or the organization to whom it
belongs.
Title
- Like the
Company
Name
field, the
Title
field is capa-
ble of holding 30 alpha/numeric characters. It allows you to
Company name and address
(Customized by user)
To Next Page
Loading...
Need help?
General
