11/8/00 Quick Start 4-5
Step 5
Press the RUN/STOP
s
key to stop the measure-
ment.
The screen shows a black box symbol in
the upper right hand corner indicating
that the instrument is stopped and not
taking a measurement.
If you attempt to store data while a
measurement is still running a warn-
ing will be displayed, indicating that
the measurement must first be
stopped.
Step 6
To store the current measurement readings, press
the
D
Data key. Select
Store File
and press the

key. This will store the measurement’s data.
Step 7
To turn off the instrument, press and hold the
v
key until you are prompted to release it. The
instrument then turns off.
NOTE: You may want to repeat the pro-
cess of running a measurement, stop-
ping, and storing its data a few times so
that you will have several samples of
stored data to choose from when trying
this exercise.
NOTE: A solid black box indicates that
the 824 is stopped with data, and a hol-
low box indicates that the 824 is
stopped with no data present.
To Next Page
Loading...
Need help?
General
