LSI Corporation
- 110 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Chapter 5: The HII Configuration Utility
Managing Controllers
Figure 76 Preview Configuration Window 2
3. Review the information listed on the window.
4. Highlight Import Foreign Configuration and press Enter.
A warning message appears indicating that the foreign configuration from the physical drives will merge with the
existing configuration.
5. To confirm the import, highlight Confirm and press the spacebar.
6. Highlight Ye s and press Enter.
The foreign configuration is imported.
5.3.8.2 Clearing a Foreign Configuration
Perform these steps to clear a foreign configuration.
1. Highlight Clear Foreign Configuration on the Manage Foreign Configuration menu and press Enter.
A warning message appears indicating that all of the foreign VDs will be deleted.
2. To confirm clearing the foreign configuration, highlight Confirm and press the spacebar.
3. Highlight Ye s and press Enter.
The foreign configuration is deleted.
NOTE You can also delete (clear) a foreign configuration after previewing the
configuration.
5.4 Managing Controllers
When you select Controller Management on the Main Menu, the Controller Management dialog appears, as
shown in the following figure.
The top-level Controller Management dialog lists some actions that you can perform on the controller.
To Next Page
Loading...
