Lenovo ThinkServer RD650 - Virtual Drive Commands

LSI Corporation
- 378 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Appendix B: 3ware CLI Commands to StorCLI Command Conversion
Virtual Drive Commands
B.5 BBU Commands
Table 62 BBU Commands
14.14 Virtual Drive Commands
Description 3ware CLI Command StorCLI Command
Show complete BBU
information, such as status,
capacity information, design
information, and properties.
/cx/bbu show all /cx/bbu show all
Show BBU summary
information.
/cx/bbu show /cx/bbu show
Show BBU properties. /cx/bbu show batinst
/cx/bbu show bootloader
/cx/bbu show fw
/cx/bbu show lasttest
/cx/bbu show pcb
/cx/bbu show serial
/cx/bbu show status
/cx/bbu show temp
/cx/bbu show tempstat
/cx/bbu show tempval
/cx/bbu show volt
/cx/bbu show properties
/cx/bbu show status
NOTE Not all the properties shown in the 3ware CLI are
shown in the StorCLI.
Show BBU capacity information. /cx/bbu show cap /cx/bbu show all
Start the learning cycle on the
BBU.
/cx/bbu test [quiet] /cx/bbu start learn