Lenovo ThinkServer RD650 - Appendix C: MegaCLI Commands to StorCLI Command Conversion

LSI Corporation
- 385 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Appendix C: MegaCLI Commands to StorCLI Command Conversion
Appendix C: MegaCLI Commands to StorCLI Command Conversion
C.1 System Commands
Table 68 System Commands
C.2 Controller Commands
Table 69 Controller Commands
Description MegaCLI Command StorCLI Command
Show the software version. MegaCLI -v storcli -v
Show help information. MegaCLI -help|-h|? storcli -help|-h|?
Show the number of controllers connected. MegaCLI -adpCount storcli show ctrlcount
Description MegaCLI Command StorCLI Command
Show the status of
properties related to the
controllers.
MegaCli -AdpGetProp
<PropertyName>-aN|-a0,1,2|-aALL
/cx show <propertyName>
The following properties can be used with this
command:
The following properties can be used with this command:
abortcconerror abortcconerror
alarmdsply alarm
autodetectbackplanedsbl backplane
autoenhancedimportdsply foreignautoimport
autosnapshotspace
batwarndsbl batterywarning
bgirate bgirate
bootwithpinnedcache bootwithpinnedcache
cachebypass cachebypass
ccrate ccrate
clusterenable
coercionmode coercion
copybackdsbl copyback
defaultldpspolicy ds
defaultsnapshotspace
defaultviewspace
disableldpsinterval ds
disableldpstime ds
disableocr ocr
eccbucketcount eccbucketsize
eccbucketleakrate eccbucketleakrate
enableeghsp eghs
enableesmarter eghs