LSI Corporation
- 300 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Chapter 10: Monitoring Controllers and Their Attached Devices
Adding Email Addresses of Recipients of Alert Notifications
If you do not want to enable this feature on the MegaRAID Storage Manager software or if you know that your
SMTP server does not support the Login mechanism, then de-select the This Server requires authentication
check box.
NOTE The This Server requires authentication check box is selected by
default.
3. Enter a user name in the User name field.
This step is optional if This Server requires authentication check box is selected.
4. Enter the password in the Password field.
This step is optional if This Server requires authentication check box is selected.
5. Click OK.
10.9 Adding Email Addresses of Recipients of Alert Notifications
The Email tab in the Configure Alerts window shows the email addresses of the recipients of the alert notifications.
The MegaRAID Storage Manager software sends alert notifications to those email addresses. Use the Configure
Alerts window to add or remove email addresses of recipients and to send test messages to recipients that you add.
To add email addresses of recipients of the alert notifications, perform the following steps:
1. Click the Email tab in the Configure Alerts window.
Figure 186 Adding Email Settings
2. Enter the email address you want to add in the New recipient email address field.
3. Click Add.
The new email address appears in the Recipient email addresses field.
To Next Page
Loading...
