LSI Corporation
- 210 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Chapter 7: MegaRAID Storage Manager Overview and Installation
Installing MegaRAID Storage Manager
Follow these steps to install the MegaRAID Storage Manager software on a system running the Solaris 10 x86
operating system:
1. Copy the MegaRaidStorageManager-SOLX86-…..tar.gz file to a temporary folder.
2. Untar the MegaRaidStorageManager-SOLX86-…..tar.gz file using the following command:
tar -zxvf MegaRaidStorageManager-SOLX86-…..tar.gz
This step creates a new disk directory.
3. Go to the new disk directory, and find and read the readme.txt file.
4. Enter the Bash shell.
5. Execute the command ./install.sh present in the disk directory.
6. When prompted by the installation scripts, select Y to complete the installation.
7.3.4.2 Installing MegaRAID Storage Manager Software for Solaris 10 SPARC
Perform the following steps to install the MegaRAID storage Manager Software for Solaris 10 SPARC.
1. Copy the MegaRaidStorageManager-SOLSPARC-8.10-…….tar.gz file to a temporary folder.
2. Untar the MegaRaidStorageManager-SOLSPARC-8.10-…….tar.gz file using the following command:
tar -zxvf MegaRaidStorageManager-SOLSPARC-8.10-…….tar.gz
This step creates a new disk directory. Go to the new disk directory, and find and read the readme.txt file.
3. Enter the Bash shell.
4. Execute the command ./install.sh present in the disk directory.
5. When prompted by the installation scripts, type Y to complete the installation.
NOTE LSI MegaRAID CacheCade Pro 2.0 software is not applicable in SPARC.
7.3.4.3 Installing MegaRAID Storage Manager Software for Solaris 11 x86
Follow these steps to install the MegaRAID Storage Manager software on a system running Solaris 10 x86.
1. Copy the MegaRaidStorageManager-SOL11X86-…….tar.gz file to a temporary folder.
2. Untar the MegaRaidStorageManager-SOL11X86-…….tar.gz file using the following command:
tar -zxvf MegaRaidStorageManager-SOL11X86-…….tar.gz
This step creates a new disk directory.
3. Go to the new disk directory, and read the readme.txt file.
4. Enter the Bash shell.
5. Execute the command ./install.sh present in the disk directory.
6. When prompted by the installation scripts, type Y to complete the installation.
7.3.4.4 Installing MegaRAID Storage Manager Software for Solaris 11 SPARC
Follow these steps to install the MegaRAID Storage Manager software on a system running Solaris 11 SPARC:
1. Copy the MegaRaidStorageManager-SOL11SPARC-…….tar.gz file to a temporary folder.
2. Untar the MegaRaidStorageManager-SOL11SPARC-…….tar.gz file using the following command:
tar -zxvf MegaRaidStorageManager-SOL11SPARC-…….tar.gz
This step creates a new disk directory.
3. Go to the new disk directory and read the readme.txt file.
4. Enter the Bash shell.
5. Execute the command ./install.sh present in the disk directory.
6. When prompted by the installation scripts, type Y to complete the installation.
To Next Page
Loading...
